logo
Shanghai Tankii Alloy Material Co.,Ltd
Shanghai Tankii Alloy Material Co.,Ltd
producten
Thuis /

producten

Invar 36 Tube 20mm OD Bright Surface High Dimensional Stability FeNi36 Alloy Precision Tubing

Productdetails

Plaats van herkomst: Sjanghai, China

Merknaam: TANKII

Certificering: ISO9001 SGS

Modelnummer: FeNi36

Betaling & het Verschepen Termijnen

Min. bestelaantal: 10 kg

Prijs: Onderhandelbaar

Verpakking Details: houten kist

Levertijd: 7-20 dagen

Betalingscondities: L/C, T/T, Western Union

Levering vermogen: 100 ton per maand

Krijg Beste Prijs
Contact opnemen
Specificaties
Markeren:

Invar 36 alloy tube 20mm

,

Iron Nickel alloy pipe 4j36

,

Invar 36 tube with warranty

Model-NR.:
invar
O.D:
0.2mm min.
GEW:
0.015 mm
Lengte:
0.2mm min.
Vorm:
spoel pijp; Capillaire buis; Naadloze buis
Oppervlak:
Helder
Steekproef:
aanvaard kleine bestelling
Model-NR.:
invar
O.D:
0.2mm min.
GEW:
0.015 mm
Lengte:
0.2mm min.
Vorm:
spoel pijp; Capillaire buis; Naadloze buis
Oppervlak:
Helder
Steekproef:
aanvaard kleine bestelling
Beschrijving
Invar 36 Tube 20mm OD Bright Surface High Dimensional Stability FeNi36 Alloy Precision Tubing

4J36 (Invar) is used where high dimensional stability is required, such as precision instruments, clocks, seismic creep gauges, television shadow-mask frames, valves in motors, and antimagnetic watches. In land surveying, when first-order (high-precision) elevation leveling is to be performed, the Level staff (leveling rod) used is made of Invar, instead of wood, fiberglass, or other metals. Invar struts were used in some pistons to limit their thermal expansion inside their cylinders.

4J36 use oxyacetylene welding, electric arc welding, welding and other welding methods. Since the coefficient of expansion and chemical composition of the alloy is related should be avoided due to welding causes a change in the alloy composition, it is preferable to use Argon arc welding welding filler metals preferably contains 0.5% to 1.5% titanium, in order to reduce weld porosity and crack.

Normal composition%

Ni 35~37.0 Fe Bal. Co - Si ≤0.3
Mo - Cu - Cr - Mn 0.2~0.6
C ≤0.05 P ≤0.02 S ≤0.02    

Coefficient of expansion

θ/ºC α1/10-6ºC-1 θ/ºC α1/10-6ºC-1
20~-60 1.8 20~250 3.6
20~-40 1.8 20~300 5.2
20~-20 1.6 20~350 6.5
20~-0 1.6 20~400 7.8
20~50 1.1 20~450 8.9
20~100 1.4 20~500 9.7
20~150 1.9 20~550 10.4
20~200 2.5 20~600 11.0

Typical Physical properties

Density (g/cm3) 8.1
Electrical resistivity at 20ºC(OMmm2/m) 0.78
Temperature factor of resistivity(20ºC~200ºC)X10-6/ºC 3.7~3.9
Thermal conductivity, λ/ W/(m*ºC) 11
Curie point Tc/ ºC 230
Elastic Modulus, E/ Gpa 144

 

 

DATASHEET FOR:STEEL GRADES:SPECIAL ALLOY:4J42

Chemical composition(mass fraction)(wt.%) of the 4J42

C(%) Si(%) Mn(%) P(%) S(%) Ni(%) Co(%) Al(%) Fe(%)
0.05 ≤0.30 ≤0.80 0.020 0.020 41.5-42.5 ≤0.1 ≤0.1 Bal

Mechanical properties / Mechanische Eigenschaften / Caracteristiques mecaniques of grade4J42

MECHANICAL PROPERTIES

Yield
Rp0.2(MPa)
Tensile
Rm(MPa)
Impact
KV/Ku (J)
Elongation
A (%)
Reduction in cross section on fracture
Z (%)
As-Heat-Treated Condition Brinell hardness (HBW)
232 (≥) 934 (≥) 22 23 14 Solution and Aging, Annealing, Ausaging, Q+T,etc 111


PHYSICAL PROPERTIES

Temper
(°C)
Modulus of elasticity
(GPa)
Mean coefficient of thermal expansion 10-6/(°C) between 20(°C) and Thermal conductivity
(W/m·°C)
Specific thermal capacity
(J/kg·°C)
Specific electrical resistivity
(Ω mm²/m)
Density
(kg/dm³)
Poisson's coefficient, ν
11 - -     0.14 -  
364 336 - 43.3 311   -  
748 - 22 43.2     211 141

Invar 36 Tube 20mm OD Bright Surface High Dimensional Stability FeNi36 Alloy Precision Tubing 0

Verzend uw onderzoek
Gelieve te verzenden ons uw verzoek en wij zullen zo spoedig mogelijk antwoorden op u.
Verzend